What Does Painters Brisbane Mean?

How to paint your concrete verandah

If you intend to add some color and life to a drab, gray concrete patio, spruce it down with paint. You can paint the patio to complement along with of your house or to provide an appealing contrast that helps set your patio apart.

When painted properly, your colorful concrete can last years.

Step 1 – Clean the Concrete Patio

Thoroughly clean your concrete patio to get rid of any dirt and debris. That you do not want anything getting in the manner of the paint and the surface, or even worse, mixing in with the newest paint.

To discover the best cleaning, mix water and some mild detergent, and then scrub it over the concrete using a broom or perhaps a long-handled scrub brush. Make sure that you completely rinse all of the soap away and enable the patio to dry.

After it's dry, make use of a top quality broom or shop-vac to eliminate any dirt and dust that also could have been left behind.

Step 2 - Apply the Exterior Paint

As long as you've chosen a top quality exterior paint that is rated for use on concrete, you should have no issue adequately within the patio surface. Paint products usually specify if they are suited to outdoor use and what surfaces they will work best on.

To begin painting, thoroughly mix your paint and pour it to the tray. Use a long-handled paint roller to discover the best results.

Don't be afraid of applying several coats of paint. In fact, many thin coats is better and more powerful than several thick coats. Follow the manufacturer's directions on the paint can for drying time before adding a second coat.

While you may be able to get away with one coat, applying more coats could make the paint stronger and more resistant to chipping or peeling in the future.

You need to allow the paint to completely dry before continuing. Depending on the type of paint you're using, this may take as long as 24-72 hours. If you intend on applying another color paint as a border or decoration, you must apply it after the very first color has completely dried.


Step 3 - Clean the Patio Again

Wipe down the patio once again with a slightly damp cloth or mop. This can help you remove any dust or debris that has settled since the paint has dried. Allow the outer lining of the concrete patio to dry for 2 to 3 hours. Only then in case you begin applying your clear sealer.

Step 4 - Apply the Clear Sealer

Pour the clear sealer into a clean paint tray and roll it onto the patio with your paint roller. Permit the sealer to dry for an hour or two between subsequent coats.

In comparison to the paint, there's no such thing as a lot of sealer. Apply as much coats as you can. The more coats of clear sealer that you apply, the tougher and the more durable the conclusion will be. Allow the outer lining to totally dry before walking on it.

During the process, you may need to use a plastic tarp to cover the patio to ensure that it does not get wet from rain, but ensure the tarp doesn't actually touch the concrete.



For the best quality residential and commercial paining in Brisbane Contact Painters Kallangur today